Blog

Shaving Fork Legs

I took some pictures of how I shaved the legs on my forks for my “Memento Mori” ironhead.

The original 35mm Showas were beat to hell, and had these big tabs for the fender which I certainly wasn’t going to run.

I started by marking out some rough cuts with a sharpie. I’ll whack off the bulk of the material with a 4.5” cutoff wheel on my angle grinder.

There is (well, was) a big pad where the reflector mounted. Ick.

I’ll use a grinding disk to knock off some of the bulk.

Time to get

 

Read more... | Published: 11/20/07

Splitting The Rockers

One of the things we did on the “Memento Mori” ironhead was to split the rockers. This isn’t a new thing, but the Ironhead rocker covers are different from Shovel rocker covers. They are shaped differently, with one side coming to a square corner and the other having a curved corner. They also have fewer bolts, so if you eliminate the middle bolt you only have three bolts holding each rocker half, not four like a shovel.

The way we modified these came from Weyland at Solutions Machining. He nailed it, modifying Ironhead rockers really requires getting the two

 

Read more... | Published: 11/17/07