Headlight Mount for 39mm Narrow Glide Forks - CHROME - $89.00

A lot of folks have asked us about putting one of our Rapide headlights on a sporty or Glide with the factory top-mounted headlight. These bikes have the traditional 39mm forks and mount the headlight off of two tabs on the top triple tree.

It’s certainly possible to drill the bottom tree to mount a standard bottom mount headlight, but let’s face it – that’s a pain in the neck and you’re left with two useless mounting tabs on your top tree.

We came up with this slick mount that takes advantage of the mount tabs and is cool as

Laser Light - $99.00

We developed this lamp in order to pack the maximum candlepower into a small headlight. Most of the cool aftermarket halogen lamps are too bulky to fit into a small housing, so we came up with our own.

This unit has a polished aluminum mount base that holds three 12 volt halogen lamps. All three lamps are rated at 75 watts. Uses two lamps for the low beam for a wide beam, one lamp for the high beam as a narrow 12 degree spot.

Bad Attitude Finned Primary Cover-Chrome - $459.00

Want to adjust your bike’s attitude and add some old-school style to your modern iron? Check out the Bad Attitude™ primary cover.

It bolts right up to a 3" BDL drive with the motor plate, and is easily adapted to other belt drive systems with owner-fabricated mounts. The space between the fins is open so you can see through to the pulleys.

This item has a full Chromed finish. Because of the nature of cast aluminum parts there may small imperfections in the finish.

Note: BDL recently changed the cover bolt pattern on their primary drive. If you

"Rapide" 4.5" Headlight - All Chrome - $299.00 to $369.00

Our new “Rapide” headlight features a distinctive scallop design and grill, just like our matching tail light and air cleaner.

The Rapide headlight uses either a 4.5” sealed beam lamp, or our triple lamp unit with 225 watts of penetrating candlepower.

The headlight comes complete with the hand finished body and grill which are show-chromed, stainless hardware, mounting base, gasket and wiring harness.

(note: this unit is shown with the optional “Laser Lamp” installed)

Vendetta Oil Filter - Chrome - $298.00

Product Description

The Vendetta Oil Filter features styling to match our popular Vendetta oval oil tank, for the cool retro look. The oil lines are oriented to match the stock Panhead filter, but it sports a chrome late model spin on filter. You can mount it anywhere, including hanging out in the breeze. The filter comes complete with a chrome K&N filter element and line fittings.

This item is hand polished and triple chrome plated. Our chrome is done by one of the best platers in the industry and is warranted against peeling for one year from purchase.

Technical Specifications

"Rapide" Tail Light - All Chrome - $229.00

Our new “Rapide” line features a style-coordinated air cleaner, head light and tail light. The Rapide line features a distinctive scallop design and a matching grill.

The Rapide taillight uses a super-bright 48 LED lamp (included) for unsurpassed visibility. The LED unit is wired for both “stop” and “run”. A chrome 3-hole fender mount base is included, along with all stainless hardware.

This item is provided with a show-chrome finish.

A chrome sidemount license plate and taillight bracket is available separately.

"Rapide" Sidemount Bracket Only - Chrome - $99.00

If you want to use one of our cool new Rapide tail lights as a side-mount tag-light setup, then this is the bracket for you.

Fabricated in steel and triple chrome plated with mount tabs for a Rapide tail light (tail light is not included). Just weld a couple of simple tabs on you frame and bolt this on. This is for a right side mount.

Includes stainless steel hardware.

Top Motor Mount - Chrome - $99.00

Our top motor mount is fabricated from steel and triple chrome plated. It fits all evo and twin cam engines from 80 CI up through 124 CI. The mount is supplied with stainless bolts.

Note: This will not fit Revtech engines as the rocker covers interfere with the mount.

Oil Filter Mount Bracket - $79.00

We designed this bracket to hang the Vendetta finned oil filter from the top motor mount. Use in conjunction with CSC-804 (top motor mount) for a unique custom look!

Headlight Bracket for 35MM Narrow Glide Forks CSC-803 - $45.00

Our bottom mount bracket for headlights adapts standard headlights to narrow glide forks as used on Sportsters, FXRs, or any bike with the lower tree pinch bolts spaced 4.75" center-to-center. (These are typically called “35MM forks”).

Fabricated out of 1/4" steel and triple chrome plated, this mount is beautiful and indestructible! Bolts are not included.