Headlight Mount for 39mm Narrow Glide Forks - CHROME - $89.00

A lot of folks have asked us about putting one of our Rapide headlights on a sporty or Glide with the factory top-mounted headlight. These bikes have the traditional 39mm forks and mount the headlight off of two tabs on the top triple tree.

It’s certainly possible to drill the bottom tree to mount a standard bottom mount headlight, but let’s face it – that’s a pain in the neck and you’re left with two useless mounting tabs on your top tree.

We came up with this slick mount that takes advantage of the mount tabs and is cool as

Laser Light - $99.00

We developed this lamp in order to pack the maximum candlepower into a small headlight. Most of the cool aftermarket halogen lamps are too bulky to fit into a small housing, so we came up with our own.

This unit has a polished aluminum mount base that holds three 12 volt halogen lamps. All three lamps are rated at 75 watts. Uses two lamps for the low beam for a wide beam, one lamp for the high beam as a narrow 12 degree spot.

"Rapide" 4.5" Headlight - All Chrome - $299.00 to $369.00

Our new “Rapide” headlight features a distinctive scallop design and grill, just like our matching tail light and air cleaner.

The Rapide headlight uses either a 4.5” sealed beam lamp, or our triple lamp unit with 225 watts of penetrating candlepower.

The headlight comes complete with the hand finished body and grill which are show-chromed, stainless hardware, mounting base, gasket and wiring harness.

(note: this unit is shown with the optional “Laser Lamp” installed)

"Rapide" Tail Light - All Chrome - $229.00

Our new “Rapide” line features a style-coordinated air cleaner, head light and tail light. The Rapide line features a distinctive scallop design and a matching grill.

The Rapide taillight uses a super-bright 48 LED lamp (included) for unsurpassed visibility. The LED unit is wired for both “stop” and “run”. A chrome 3-hole fender mount base is included, along with all stainless hardware.

This item is provided with a show-chrome finish.

A chrome sidemount license plate and taillight bracket is available separately.

"Rapide" Sidemount Bracket Only - Chrome - $99.00

If you want to use one of our cool new Rapide tail lights as a side-mount tag-light setup, then this is the bracket for you.

Fabricated in steel and triple chrome plated with mount tabs for a Rapide tail light (tail light is not included). Just weld a couple of simple tabs on you frame and bolt this on. This is for a right side mount.

Includes stainless steel hardware.

Hard-Ass Solo Seat - Polished Stainless Steel - $475.00

The “Hard Ass” solo seat was the very first product we developed, working with Mark at dbbp.com to do the CAD modeling.

The seat is investment cast 300 series stainless steel. After casting the part is machined, all of the mounting bosses are machined right into the seat, tapped for 3/8"-24 UNF threads. After machining the seat goes through an extensive polishing process, by hand, to achieve a perfect mirror finish. It is as shiny and rich as chrome, but with the advantage that it will never peel or rust. If you get a scratch in your seat

Hard-Ass P-Pad - $220.00

The Hard-Ass Companion Pad is hand fabricated in the USA from 300 series stainless steel and mirror polished. The leather inserts are handmade by a Sid Chavers – a well known Street Rod upholsterer – and are available in your choice of black, red or white leather or red metalflake.

The p-pad bolts to your fender using three stainless machine screws, which are included. The pad and frame may be bent as necessary to fit your fender.