Headlight Mount for 39mm Narrow Glide Forks - CHROME - $89.00

A lot of folks have asked us about putting one of our Rapide headlights on a sporty or Glide with the factory top-mounted headlight. These bikes have the traditional 39mm forks and mount the headlight off of two tabs on the top triple tree.

It’s certainly possible to drill the bottom tree to mount a standard bottom mount headlight, but let’s face it – that’s a pain in the neck and you’re left with two useless mounting tabs on your top tree.

We came up with this slick mount that takes advantage of the mount tabs and is cool as

Nor-Cal Star Kicker - $179.00

Limited Production!

One of our friends was looking for something different in a kick start pedal, based on some of his ideas we came up with this awesome kicker.

CNC machined from solid brass (or aluminum), this is a work of art. Both sides are knurled so there is no chance of your foot slip’n off. Price includes the pedal in your choice of solid brass or aluminum as shown, plus the complete pivot shaft.

Headlight Mount for 39mm Narrow Glide Forks - BLACK POWDER COAT CSC-932 - $89.00

A lot of folks have asked us about putting one of our Rapide headlights on a sporty or Glide with the factory top-mounted headlight. These bikes have the traditional 39mm forks and mount the headlight off of two tabs on the top triple tree.

It’s certainly possible to drill the bottom tree to mount a standard bottom mount headlight, but let’s face it – that’s a pain in the neck and you’re left with two useless mounting tabs on your top tree.

We came up with this slick mount that takes advantage of the mount tabs and is cool as

Handlebar Switch Box - $35.00 to $45.00

Here is a nifty little item for all you fabricators out there. This switch box is machined from mild steel and can be welded or bolted to your handlebars.

The back is coped so that it makes a really nice tight fit to your 1" handlebars.

This kit includes one complete box assembly. That is the box, cover, two switches and screws.

One switch is a DPDT (two sets of contacts with 3 positions ON-OFF-ON) and the other is a momentary contact push button.

You can also get this without the switches and an un-drilled cover if you

Flared Exhaust Flanges - $35.00

Check it out, these exhaust flanges for Evo and Twin Cam engines let you fabricate cool exhaust pipes. Instead of a flat flange you get a nice smooth radial transition from the port face into the tube.

These are CNC’d out of a 1″ × 3″ × 4″ solid block of steel. We weld the tube to the flange from the back side and silver braze the outside to blend the two parts together.

Sold each.

Crime Scene Beanie - $15.00

THEY ARE BACK!

The perfect solution to those cold nights in the shop, our embroidered beanie features our logo in red and white stitching on a black knit cap.

One size fits all.

"Rapide" Sidemount Bracket Only - Chrome - $99.00

If you want to use one of our cool new Rapide tail lights as a side-mount tag-light setup, then this is the bracket for you.

Fabricated in steel and triple chrome plated with mount tabs for a Rapide tail light (tail light is not included). Just weld a couple of simple tabs on you frame and bolt this on. This is for a right side mount.

Includes stainless steel hardware.

Torque Plate with BDL Cover Bolt Pattern - $95.00

If you have an open belt drive (or an open chain drive) without a torque plate you owe it to yourself to add one. It will greatly increase the rigidity of your primary drive.

Our torque plate is set up to mount the Bad Attitude finned primary.

Top Motor Mount - Chrome - $99.00

Our top motor mount is fabricated from steel and triple chrome plated. It fits all evo and twin cam engines from 80 CI up through 124 CI. The mount is supplied with stainless bolts.

Note: This will not fit Revtech engines as the rocker covers interfere with the mount.

Oil Filter Mount Bracket - $79.00

We designed this bracket to hang the Vendetta finned oil filter from the top motor mount. Use in conjunction with CSC-804 (top motor mount) for a unique custom look!