Bad Attitude Finned Primary Cover - Satin - $335.00

Want to adjust your bike’s attitude and add some old-school style to your modern iron? Check out the Bad Attitude™ primary cover.

It bolts right up to a 3” BDL drive with the motor plate, and is easily adapted to other belt drive systems with owner-fabricated mounts. The space between the fins is open so you can see through to the pulleys.

This item has a fine satin finish and the edges of the fins are highlight polished.

Note: BDL recently changed the cover bolt pattern on their primary drive. If you have a drive made prior to

Bad Attitude Primary Cover - Full Polish - $450.00

Want to adjust your bike’s attitude and add some old-school style to your modern iron? Check out the Bad Attitude™ primary cover.

It bolts right up to a 3” BDL drive with the motor plate, and is easily adapted to other belt drive systems with owner-fabricated mounts. The space between the fins is open so you can see through to the pulleys.

This item has a full polished finish. Because of the nature of cast aluminum parts there may small imperfections in the finish.

Note: BDL recently changed the cover bolt pattern on their primary drive. If you

BDL Cover Adapter - $59.00

For some reason BDL decided to change the bolt pattern on their primary drives last year. Unfortunately it meant that everyone was destined to have mismatched primary drives and covers.

Well, no more. We make the rugged adapter for the old style cover to the new style primary drive plate.

Here is how to tell whether you have the old style or new style drive: measure the vertical distance between the two rear cover mount bolts (the two next to the transmission). They will either be 4” or 4.5” apart, center-to-center. 4” is the old style primary plate, our