Headlight Mount for 39mm Narrow Glide Forks - CHROME - $89.00

A lot of folks have asked us about putting one of our Rapide headlights on a sporty or Glide with the factory top-mounted headlight. These bikes have the traditional 39mm forks and mount the headlight off of two tabs on the top triple tree.

It’s certainly possible to drill the bottom tree to mount a standard bottom mount headlight, but let’s face it – that’s a pain in the neck and you’re left with two useless mounting tabs on your top tree.

We came up with this slick mount that takes advantage of the mount tabs and is cool as

Laser Light - $99.00

We developed this lamp in order to pack the maximum candlepower into a small headlight. Most of the cool aftermarket halogen lamps are too bulky to fit into a small housing, so we came up with our own.

This unit has a polished aluminum mount base that holds three 12 volt halogen lamps. All three lamps are rated at 75 watts. Uses two lamps for the low beam for a wide beam, one lamp for the high beam as a narrow 12 degree spot.

"Rapide" Tail Light -Polished Aluminum and Polished Brass - $199.00

Our new “Rapide” line features a style-coordinated air cleaner, head light and tail light. The Rapide line features a distinctive scallop design and a matching grill.

The Rapide taillight uses a super-bright 48 LED lamp (included) for unsurpassed visibility. The LED unit is wired for both “stop” and “run”. A chrome 3-hole fender mount base is included, along with all stainless hardware.

A chrome sidemount license plate and taillight bracket is available separately.

This only comes as a fully polished body and polished brass grill.
To get a satin finish:
1) The simplest approach would

"Rapide" 4.5" Headlight - All Chrome - $299.00 to $369.00

Our new “Rapide” headlight features a distinctive scallop design and grill, just like our matching tail light and air cleaner.

The Rapide headlight uses either a 4.5” sealed beam lamp, or our triple lamp unit with 225 watts of penetrating candlepower.

The headlight comes complete with the hand finished body and grill which are show-chromed, stainless hardware, mounting base, gasket and wiring harness.

(note: this unit is shown with the optional “Laser Lamp” installed)

"Rapide" 4.5" Headlight, Black Powder Coat - $299.00 to $369.00

The Rapide head light in satin black powder coating. We hand prep these, polish the edges of the grill and powder coat them black. The coating is wiped off before baking for a killer look. Uses a standard 4.5" sealed beam lamp (not included) or our Laser Lamp unit.

"Rapide" Air Cleaner - Satin Balck - $319.00

Our new “Rapide” air cleaner features a distinctive scallop design and grill, just like our matching tail light and head light.

The Rapide air cleaner fits both S&S Super E or G, or stock CV carbs. It can be used with a Mikuni card with an adapter, which we can provide.

This air cleaner includes the body, grill and mounting plate all finished in satin black powdercoat. We top it off with a brushed aluminum finish on the edges of the grill bars to make it really “pop”. Also included are the stainless attachment clip, stainless filter support screen, all

"Rapide" Tail Light, Satin Black Powder Coat - $219.00

We now have the Rapide tail light in stock in beautiful satin black powder coat. The leading edge of the grill bars are polished.

Includes chrome mounting base (black finished base shown).

Crime Scene Beanie - $15.00

THEY ARE BACK!

The perfect solution to those cold nights in the shop, our embroidered beanie features our logo in red and white stitching on a black knit cap.

One size fits all.

"Rapide" Air Cleaner - Polished Brass and Mirrored Aluminum - $319.00 to $339.00

Our new “Rapide” air cleaner features a distinctive scallop design and grill, just like our matching tail light and head light. You must do the satin finish yourself.

The Rapide air cleaner fits both S&S Super E or G, or stock CV carbs. It can be used with a Mikuni card with an adapter, which we can provide.

This air cleaner includes the Mirrored-finished body, polished brass grill, mounting plate, stainless attachment clip, stainless filter support screen, all stainless hardware and two filter elements (one high flow and one standard).

This only comes as a mirrored body and polished brass

"Rapide" 4.5" Headlight - Polished Brass and Polished Aluminum - $299.00 to $369.00

Our new “Rapide” headlight features a distinctive scallop design and grill, just like our matching tail light and air cleaner.

The Rapide headlight uses either a 4.5” sealed beam lamp, or our triple lamp unit with 225 watts of penetrating candlepower.

The headlight comes complete with the hand finished body and grill, stainless hardware, mounting base, gasket and wiring harness.

This only comes as a fully polished body and polished brass grill.
To get a satin finish:
1) The simplest approach would be to use a red Scotchbrite pad and hand rub the areas you want to