3/8" Socket Head Cap Screw Bosses (set of 10) - $35.00

These are counter-bored bosses for 3/8" socket head cap screws. They are machined so that the top of the cap screw is flush with the top of the boss.

Use these for making motor mounts, sissy bar mounts, fender mounts or 100’s of other uses on your project.

Sold as a set of 10 bosses.

Cap screws not included.

3/8" UNC Blind Tapped Bosses (set of 10) - $40.00

These simple parts are so valuable when you’re fabricating parts for your bike. We used them in conjunction with our socket-head bolt bosses to mount the rear fender on the new Ironhead build we recently did. We use them for mounting gas tanks, oil bags and 100 other things. Keep ’em on hand!

These are blind-tapped for 3/8" coarse threads.

Sold as a set of 10 bosses.

7/16" Socket Head Cap Screw Bosses (set of 10) - $35.00

These are counter-bored bosses for 7/16” socket head cap screws. They are machined so that the top of the cap screw is flush with the top of the boss.

Use these for making motor mounts, sissy bar mounts, fender mounts or 100’s of other uses on your project.

Sold as a set of 10 bosses.

Cap screws not included.

Astro Exhaust Tips - Polished Stainless - $89.00

Our Astro stainless exhaust tips are out of this world. They look like they may be spare parts from Buck Rogers’ ship, or perhaps a 1950’s Detroit dream car.

Precision formed from .090" thick stainless steel and hand polished to a mirror finish, these distinctive exhaust flares are sure to help your bike stand out in the crowd.

These fit into a 2" OD tailpipe, and are held in place with a stainless screw (included).

These are extremely high quality parts crafted in heavy gauge stainless steel, they will last forever.

Sold each

Bad Attitude Finned Primary Cover - Satin - $335.00

Want to adjust your bike’s attitude and add some old-school style to your modern iron? Check out the Bad Attitude™ primary cover.

It bolts right up to a 3" BDL drive with the motor plate, and is easily adapted to other belt drive systems with owner-fabricated mounts. The space between the fins is open so you can see through to the pulleys.

This item has a fine satin finish and the edges of the fins are highlight polished.

Note: BDL recently changed the cover bolt pattern on their primary drive. If you have a drive made prior to

Bad Attitude Primary Cover - Full Polish - $450.00

Want to adjust your bike’s attitude and add some old-school style to your modern iron? Check out the Bad Attitude™ primary cover.

It bolts right up to a 3" BDL drive with the motor plate, and is easily adapted to other belt drive systems with owner-fabricated mounts. The space between the fins is open so you can see through to the pulleys.

This item has a full polished finish. Because of the nature of cast aluminum parts there may small imperfections in the finish.

Note: BDL recently changed the cover bolt pattern on their primary drive. If you

Basic Techniques for Working With Steel - DVD - $40.00

This is probably the most comprehensive metalworking video to date: Ron Covell thoroughly demonstrates basic hammer and dolly techniques, and shows how to do high-level metalwork that requires no filler. In the video, he starts with a 1932 Morgan in very bad condition, and goes through every step of perfectly restoring the body. Great coverage of hole filling, patch panels, wired edge repair, rust repair, TIG welding, metal finishing, and shrinking. You’ll see how top-quality metalwork can be done with very simple tools!

100 minutes

BDL Cover Adapter - $59.00

For some reason BDL decided to change the bolt pattern on their primary drives last year. Unfortunately it meant that everyone was destined to have mismatched primary drives and covers.

Well, no more. We make the rugged adapter for the old style cover to the new style primary drive plate.

Here is how to tell whether you have the old style or new style drive: measure the vertical distance between the two rear cover mount bolts (the two next to the transmission). They will either be 4" or 4.5" apart, center-to-center. 4" is the old style primary plate, our

Bobber-T - $19.00

Grab one of our new “Bobber-Ts” while they last! We had a cool hot rod artist (Tuck) do the artwork and we’re printing them in cream and red on quality black t-shirts.

Please select your size from the list.

Brass Head Bolt Covers - $59.00

Our Brass Nuts lend a cool retro flair to your Evolution or Twin Cam powered ride. These stylish head bolt covers slip over the existing head bolts and are secured with a setscrew, which can be positioned to the side and accessed between the fins.

CNC machined out of brass billet, these are provided with a fine machined finish. Sold as a set of four Brass Nuts, including set screws